Rewrite the future of the Automotive industry

The auto industry in India is the fourth largest in the world and accounts for approximately a 7% share of the GDP of the country. This industry is set to increase at a CAGR of 12.7% and reach about US$ 300 billion by the end of 2026. India is considered to be the top manufacturer of two-wheelers and the 4th largest car manufacturer.

The Automobile industry is at a point of inflection and is witnessing a dramatic transformation in dimensions such as auto-shift to driver-assisted and autonomous driving, IC engines to electric engines, infotainment to connected automobiles, and passive safety to active safety. All stakeholders in the industry need to upgrade themselves to be a part of this change to innovate, achieve and lead the future of the automotive industry.

M.Tech. Automotive Engineering is a four-semester Work Integrated Learning Programme designed to help engineering professionals build skills required to remain competitive in the rapidly evolving workplace and enable rapid career progression in the automotive industry.

M.Tech. Automotive Engineering is a BITS Pilani Work Integrated Learning Programme (WILP). BITS Pilani Work Integrated Learning Programmes are UGC approved.

 

Option to pay fees using easy EMI with 0% interest and 0 down payment

WILP programs are

WILP programs are

UGC approved

Easy EMI Option With

Easy EMI Option With

0% Interest & 0 Down Payment

Admission begins

Admission begins

April,2024

Fees per semester

Fees per semester

INR 63,500

Programme Highlights


  1. M.Tech. Automotive Engineering is a BITS Pilani Work Integrated Learning Programme (WILP). BITS Pilani Work Integrated Learning Programmes are UGC approved.
  2. The programme is of four semesters, with online classes conducted mostly on weekends or after business hours. You can pursue the programme without any career break.
  3. Special focus on Engine technologies, Electric mobility, Automotive control systems, and Automotive systems engineering.
  4. Futuristic curriculum developed by academic experts in consultation with leading automotive organisations.
  5. A two-day intensive boot camp session to learn and apply contemporary topics such as ‘Design Thinking, ADAS, Engine Calibration and Automotive Systems Engineering’.
  6. An annual conclave to network, learn and share best practices with the leading industry professionals and academicians.
  7. The education delivery methodology is a blend of classroom and experiential learning. Emphasis on Experiential learning through an Integrated Automotive Engineering lab with remote access capabilities, in addition to assignments, case studies and other work-integrated activities.
  8. The Dissertation (Project Work) in the final semester enables students to apply concepts and techniques learnt during the programme.
  9. The programme uses a Continuous Evaluation System that assesses the learners over convenient and regular intervals. Such a system provides timely and frequent feedback and helps busy working professionals stay on course with the programme.
  10. Participants who successfully complete the programme will become members of an elite & global community of BITS Pilani Alumni.
  11. Option to submit fee using easy-EMI with 0% interest and 0 down payment.

UGC Approval

BITS Pilani is an Institution of Eminence under UGC (Institution of Eminence Deemed to be Universities) Regulations, 2017. The Work Integrated Learning Programmes (WILP) of BITS Pilani constitutes a unique set of educational offerings for working professionals. WILP are an extension of programmes offered at the BITS Pilani Campuses and are comparable to our regular programmes both in terms of unit/credit requirements as well as academic rigour. In addition, it capitalises and further builds on practical experience of students through high degree of integration, which results not only in upgradation of knowledge, but also in up skilling, and productivity increase. The programme may lead to award of degree, diploma, and certificate in science, technology/engineering, management, and humanities and social sciences. On the recommendation of the Empowered Expert Committee, UGC in its 548th Meeting held on 09.09.20 has approved the continued offering of BITS Pilani’s Work Integrated Learning programmes.

Programme Curriculum

Participants need to take at least 12 courses towards coursework, and complete one Project/ Dissertation. The coursework requirement for the programme would consist of a set of core courses and electives. Core courses are compulsory for all participants, while electives can be chosen based on individual learning preferences.

  • Mechatronics
  • Advances in IC Engines
  • Advances in Vehicle Body Structures
  • Vehicle Dynamics
  • Elective 1
  • Elective 2
  • Elective 3
  • Elective 4
  • Automotive Systems Engineering
  • Elective 5
  • Elective 6
  • Elective 7
  • Dissertation
  • Automotive Control Systems
  • Embedded System Design
  • Electric and Hybrid Vehicles
  • Automotive Security
  • Advanced Vehicle Acoustics
  • Product Design
  • Advances in Materials, Composites & Plastics
  • Advanced Engine Technology
  • Durability, Crash & Safety Engineering
  • Advanced Driver Assistance Systems
  • Connected Cars
  • Advanced Automotive Systems
  • Advanced Engineering Mathematics 
  • Fracture Mechanics
  • Computer Aided Engineering

For more information on programme curriculum download the programme brochure.

Choice of Electives is made available to enrolled students at the beginning of each semester. A limited selection of Electives will be offered at the discretion of the Institute.

For detailed programme curriculum, download the brochure.

Learning Methodology

ATTEND ONLINE LECTURES OVER WEEKENDS

Lectures are conducted live via online classes. These lectures can be attended via the internet using a computer from any location. These online classrooms offer similar levels of interactivity as regular classrooms at the BITS Pilani campus.

Classes for students admitted during the period Oct 2023 - Jan 2024 will begin in Jan 2024. The class schedule is announced within 1 week of completion of the admission process.

The online lectures are conducted usually over weekends for a total of 7-8 hours per week. If you miss a lecture, you can also access the recorded lecture on the internet.

DIGITAL LEARNING

Learners can access engaging learning material which includes recorded lectures from BITS Pilani faculty members, course handouts and recorded lab content where applicable.

CONTINUOUS ASSESSMENT

Continuous Assessment includes graded Assignments/ Quizzes, Mid-semester exam, and Comprehensive Exam.

EXPERIENTIAL LEARNING
<

The program emphasises on application of engineering and science learnt in the class through virtual and remote labs:

Learners perform a variety of experiments using industry scale simulation software in a virtual lab such as Ricardo, Matlab Simulink etc. Controlled experiments are performed in Automotive Engineering Remote Labs, accessing physical lab equipment using remote control systems.

CASE STUDIES AND ASSIGNMENTS

Carefully chosen real-world cases & assignments are both discussed and used as problem-solving exercises during the programme.

DISSERTATION/ PROJECT WORK

The fourth semester offers an opportunity for learners to apply their knowledge gained during the programme to a real-world like complex project. The learner is expected to demonstrate understanding of vital principles learnt across semesters and their ability to successfully apply these concepts.

Online Labs & Remote Labs

VIRTUAL LAB

The virtual lab is a cloud-based simulation platform to design, develop and test solutions to engineering problems. It instils the requisite skills and ability to solve large scale complex problems encountered in the industry. The lab hosts a range of popular software tools to accurately model and simulate real engineering processes. The lab has live-support and is open 24x7x365.

Participants of M.Tech. Automotive Engineering can access the following virtual labs:

Vehicle dynamics lab

The objective of the lab is to familiarize the students with the longitudinal, lateral and vertical dynamics of a vehicle. Software includes modellica based libraries for domains such as power train, IC engines, drives, transmission, battery, hydraulics, pneumatics and electrical. Participants can perform experiments such as Longitudinal, lateral and vertical dynamics of a vehicle, Tire dynamics.

Electric & hybrid vehicles lab

The Electric & hybrid vehicles lab provides the environment for modeling the  complete vehicle system in conventional, hybrid, electric and novel vehicle architectures using MATLAB/Simulink and the built-in powertrain library in Ricardo Ignite. It offers adjustable component fidelity for vehicle modeling – from initial concept to detailed powertrain integration. Participants can perform experiments such as IC engine modelling, Electric vehicle modeling for MPGe.

ANSYS lab

ANSYS is a finite element analysis software used for solving a variety of engineering problems. The lab deals with the numerical simulation of mechanical and thermal loads on objects having complex geometry and made of various materials. It supports the mechanical design of parts and to perform scenario analyses to finalize the design. Participants can perform experiments such as Static and dynamic performance under structural and thermal loading, Estimating the safety margin and potential areas of failure

IC Engines lab

This lab enables the users to realize the operation of an IC engine utilizing a 1D math model consisting of predefined elements such as cylinders, ducts, valves and turbochargers. System optimization is achieved by adjusting the design drivers such as valve timing, injector location and fuel type. Participants can perform experiments such as Modeling gasoline, multi cylinder diesel, common rail and naturally aspirated gasoline engines, Forced induction and dual fuel systems

MATLAB Lab

MATLAB (MATrix LABoratory) is a multi-paradigm numerical computing environment and proprietary programming language. MATLAB is used for computer programming, mathematical modelling such as geometry, dynamics & robotics, and Model In the Loop (MIL) simulations. Participants can perform experiments such as Programming in MATLAB, Validating created curves and surfaces using the curve fitting toolbox

REMOTE LAB

The remote lab is an environment to perform controlled experiments from anywhere using IoT- enabled lab equipment and integrated remote access network. The lab is open 24x7x365.  Remote Lab is yet another attempt by the WILP division of BITS Pilani to bring the campus learning experience to working professionals complementing their work-life-learning balance.

Participants of M.Tech. Automotive Engineering can access the following remote labs:

Steer-by-wire test rig

Steer-by-wire test rig comprises of a master and slave steering wheel setup that is controlled using MATLAB/Simulink environment via CAN communication. The actuators are controlled by Arduino microcontrollers in a closed-loop system based on sensor measurements. Participants can perform experiments such as Develop a steering-control strategy for autonomous driving taking inputs from CAN messages, Implement a PI controller to minimize the error and achieve target using a closed loop system.

Brake-by-wire test rig

Brake-by-wire test rig comprises of a single wheel controlled by a motor to simulate the braking system in hard braking conditions. Participants can perform experiments such as Develop a control strategy for applying brakes using desired slip ratio for different road-tire slip conditions, Implement a PI controller to minimize error and achieve target using a closed loop system.

HIL (Hardware-In-the-Loop) test rig

HIL test rig consists of data acquisition for I/O signal communication for testing real-time hardware components integrated with the real-time plant model. Participants can perform experiments such as Tune the automotive engine controller using the mapped engine model, Design and develop a controller for EV & HEV.

 

Emission analysis using AVL DiTEST

AVL DiTEST is an equipment to handle emission measurement and diagnostic codes from OBD – II Protocol. It can measure exhaust gaseous emission and smoke intensity of vehicles. Participants can perform experiments such as Electronic Control Unit diagnostics, Exhaust emission measurement/analysis

Electronic throttle body test rig

The ECU-based electronic throttle body is used to explore various control strategies to obtain the desired throttle valve position and valve opening rate in a modern electronic throttle body. The control algorithm is modeled in MATLAB/Simulink. Participants can perform experiments such as Modeling control strategies such as cruise and fail-safe, Manual and automatic PID tuning of throttle position

 

Automatic gear box test rig

This test rig focuses on building a complex strategy to operate a gearbox under many conditions such as steep gradients, excess speed and overload. Participants can perform experiments such as Develop control strategies for automatic gear box, Develop control strategy for uphill mode and several failsafe modes in MATLAB/Simulink.

Chassis dynamometer

Chassis dynamometer creates virtual road conditions by running the vehicle on heavy inertial rollers. Real time data such as vehicle power and torque are recorded during the test. Participants can perform experiments such as Tabulating real time power and torque data recorded at different vehicle speed, Calibrating CI & SI engines and create new map.

Petrol engine test rig with eddy current dynamometer

The eddy current dynamometer is connected to a four-cylinder gasoline engine and calibrated with a standalone ECU. Participants can perform experiments such as Calibrate the engine and create the engine map. Remap the ECU with EFI calibrating tools to validate engine calibration

Automotive Cyber Systems (ACS) lab

The ACS lab aims at providing a complete knowledge and first-hand experience of automobile to the students of Automotive Engineering & Electronics. The lab uses both virtual tools and hardware. Students use them to understand the CAN (Controller Area Network), CAN FD, LIN (Local Interconnect Network), Ethernet networks, ECU Flashing & CAN Fuzz (Software Penetration & Security Testing), Automotive Ethernet & DoIP, Automotive Ethernet Switches.

Advanced Driver Assistance Systems (ADAS) lab

The objective of the lab is to familiarize the students with the latest technology supporting driver assistance systems. Participants can perform experiments such as Distance measurement using ultrasonic sensors and distance calculation of objects using front and rear ultrasonic sensors, Audio and visual warning using buzzer and LED respectively

Mode Of Examination

Examinations Mode Options applicable for students admitted in Batch starting in April 2024:

Semester 1, 2 and 3 have Mid-Semester Examinations and Comprehensive Examinations for each of course. These examinations are mostly scheduled on Friday, Saturday or Sunday. During these semesters, in addition to the Mid-Semester and Comprehensive examinations, there will also be Quizzes/Assignments conducted online on the Learning Management System (LMS) as per the course plan in which the students need to participate. In Semester 4 (Final Semester), the student will be doing a Dissertation/Project Work as per the Institution’s guidelines.

Two Options on Mode of Examinations:

It is institute’s endeavour to offer two options on mode of exams at the time of the registration for each semester of the programme. However, please note that Option 2 as explained below is offered purely on the discretion of the institute. Availability of Option 2 is not assured and is subject to institute’s own assessment of the feasibility of providing it. Students will need to choose one from the available option/s provided by the institute at the time of registering for every semester. The two mode of exam options are explained below:

Option 1 - Examinations at Designated Examination Centres: Students choosing this option will need to appear in person for taking the examinations at the institution’s designated examination centres as per the examination schedule, instructions, rules and guidelines announced before every examination. These designated examination centres are at the following locations: Bangalore, Chennai, Delhi NCR, Hyderabad, Pune, Mumbai, Kolkata, Goa, Pilani, Chandigarh, Lucknow, Indore, Bhubaneswar, Jaipur, Ahmedabad, Jamshedpur, Guwahati, Visakhapatnam, Nagpur, Vijayawada, Kochi, Thiruvananthapuram and Coimbatore. In addition to these locations, Institution also has a designated examination centre in Dubai.

Option 2 - Online ExaminationsStudents choosing this option can take the examinations online from any location e.g. office or home. However the Institute at its discretion may choose not to offer this option and in such a case students will need to take the examinations as per Option 1 that entails appearing for the examination at any one of the designated examination centres. Also, to take an Online Examination, the student must possess a Laptop or Desktop system with Two Web Cams (One Web Cam for the student’s frontal face view and a Second Web Cam for the student’s and Laptop or Desktop system’s full side view during the exam), a smart phone and good internet connectivity. Please click here to refer to the complete details about mandatory IT and Non-IT Infrastructure requirements for taking the online examinations. A student should choose this option only if the student is confident to arrange the required mandatory IT Infrastructure and Non-IT Infrastructure to take the examinations under this mode. Students opting for online examinations would require to log in to the institution’s online examination platform as per the announce examination schedule and take the online examinations in compliance with the institution’s defined instructions, guidelines, and rules which are announced before all examinations.

Important: While it will be institute’s endeavour to offer both the above options for students to choose from at the time of registering for any semester, however availability of the online mode option may not always be feasible or is assured and Institute at its own discretion could choose to offer only Option 1 as mentioned above. Also note that The Institute regularly takes actions to optimize its examination system and hence the mandatory IT and Non-IT Infrastructure requirements, instructions, guidelines, and rules associated with both the above mentioned examination modes may change anytime at the Institute's discretion. All students will need to 100% comply with any such changed specifications announced by the Institute.

Eligibility Criteria

Minimum eligibility to apply: To apply, candidates must be employed professionals holding BE/ B.Tech. in relevant disciplines with at least 60% aggregate marks, and minimum one year of working experience after the completion of the degree in the relevant domain.

The programme is designed for highly driven and ambitious professionals who wish to prepare themselves for the emerging technologies in Automotive Engineering, and acquire skills in core technical areas such as IC Engines, Electric Mobility, ADAS to lead research and development projects in technology-driven automotive engineering organisations.

Fee Structure

The following fees schedule is applicable for candidates seeking new admission during the academic year 2023-24.

  • Application Fees (one time) : INR 1,500
  • Admission Fees (one time) : INR 16,500
  • Semester Fees (per semester) : INR 63,500

The one-time Application Fee is to be paid at the time of submitting the Application Form through the Online Application Centre.

Admission Fee (one-time) and Semester Fee (for the First Semester) are to be paid together once admission is offered to the candidate. Thus, a candidate who has been offered admission will have to pay INR 80,000/-. You may choose to make the payment using Netbanking/ Debit Card/ Credit Card through the Online Application Centre. Option to submit fee using easy-EMI with 0% interest and 0 down payment. Click here to learn more.

Semester Fee for subsequent semesters will only be payable later, i.e. at the beginning of those respective semesters.

Any candidate who desires to discontinue from the programme after confirmation of admission & registration for the courses specified in the admit offer letter will forfeit the total amount of fees paid.

For the examination centre at Dubai, in addition to the semester fees, for each semester there will be an examination centre fees of 1000 UAE Dirhams or equivalent per semester out of which 500 UAE Dirhams is to be paid at the time of appearing in Mid-semester examinations at Dubai Centre for that semester and the remaining 500 UAE Dirhams is to be paid at the time of appearing in comprehensive examinations at Dubai centre for that semester.

All the above fees are non-refundable.

Important: For every course in the program institute will recommend textbooks, students would need to procure these textbooks on their own.

How to Apply

  1.  
  2. Once you have logged in, you will see a screen showing 4 essential steps to be completed to apply for the programme of your choice.
  3. Begin by clicking on Step 1 - ‘Fill/ Edit and Submit Application Form’. This will enable you to select the programme of your choice. After you have chosen your programme, you will be asked to fill your details in an online form. You must fill all the details and press ‘Submit’ button given at the bottom of the form.
  4. Take the next step by clicking on Step 2 - 'Download Application PDF Copy’. This will download a pdf copy of the application form on your computer.
  5. Now, click on Step 3 - 'Pay Application Fee’ to pay INR 1,500/- using Netbanking/ Debit Card/ Credit Card.
  6. Take a printout of the downloaded Application Form and note down the Application Form Number displayed on the top-right corner of the first page. This Application Form Number should be referred in all future correspondence with BITS Pilani.
  7. In the printout of the downloaded Application Form, you will notice on page no. 3 a section called the Employer Consent Form. Complete the Employer Consent Form. This form needs to be signed and stamped by your organisation’s HR or any other authorised signatory of the company.

    Important: In view of work-from-home policies mandated by many organisations, a few candidates may not be able to get the physical forms signed by their HR/ other authorised organisational representative. Such candidates may instead request an email approval to be sent to their official email ID by the HR using the format available through this link.

  8. Further on page no. 4 of the printed Application Form is a section called the Mentor Consent Form. The Mentor Consent Form needs to be signed by the Mentor. Click here to know who could be a Mentor.

    Important: In view of work-from-home policies mandated by many organisations, a few candidates may not be able to get the physical forms signed by their Mentor. Such candidates may instead request an email approval to be sent to their official email ID by the Mentor using the format available through this link.

  9. Further on page no. 5 of the downloaded Application Form, is a Checklist of Enclosures/ Attachments.
  10. Make photocopies of the documents mentioned in this Checklist.
  11. Applicants are required to self-attest all academic mark sheets and certificates.
  12. Finally, click on Step 4 - 'Upload & Submit All Required Documents’. This will allow you to upload one-by-one the printed Application Form, Mentor Consent Form, Employer Consent Form, and all mandatory supporting documents and complete the application process. Acceptable file formats for uploading these documents are DOC, DOCX, PDF, ZIP and JPEG.
  13. Upon receipt of your Application Form and all other enclosures, the Admissions Cell will scrutinise them for completeness, accuracy and eligibility.
  14. Admission Cell will intimate selected candidates by email within two weeks of submission of application with all supporting documents. The selection status can also be checked by logging in to the Online Application Centre.

Batch Profile

M.Tech. Automotive Engineering - Batch Profile

Student Speak

FAQs

M.Tech. Automotive Engineering is a BITS Pilani Work Integrated Learning Programme (WILP). BITS Pilani Work Integrated Learning Programmes are UGC approved.

This programme is designed for working professionals. At the time of submitting the application, candidates must be employed in another organization. Professionals who are owners of a registered business are also eligible to apply. For detailed information, including academic background, work experience, etc. refer to the programme eligibility criteria.

Lectures are conducted live via online classes. These lectures can be attended via the internet using a computer from any location. These online classrooms offer similar levels of interactivity as regular classrooms at the BITS Pilani campus. The online lectures are conducted usually over weekends for a total of 7-8 hours per week. If you miss a lecture, you can also access the recorded lecture on the internet.

Upon successful completion of the programme, participants will receive a degree certificate from BITS Pilani.

The Degree of Master of Technology in Automative Engineering

Each semester has a Mid-semester Exam and a Comprehensive Exam, which are conducted over weekends. Participants will need to appear in-person to take these exams at exams centers in the following locations:
India Centers: Bangalore, Chennai, Delhi, Goa, Hyderabad, Kolkata, Mumbai, Pilani, Pune
International Centers: Dubai
In case participants are unable to take an exam due to work-related commitments, there is also a provision of appearing for Make-up Exams.
Due to the ongoing pandemic, an option of taking exams online is also being offered. For details, please refer to the programme brochure.

The programme provides high degree of interactivity between participants and the faculty members and programme instructors. Q&A sessions during the live online lectures allow participants to pose questions to the faculty members, and seek guidance through voice and chat. Further interaction with faculty members and peers is enabled through the e-learning portal, by using discussion forums and message boards. 

The programme features high usage of experiential learn components such as Simulations, Virtual Labs, and Remote Labs, in order to mimic the on-campus experience.
Participants will be given access to portals, that will allow them to access both cloud-based labs, as well as Campus-based physical labs. Using leading industry-recognised Software tools, Programming languages, and Simulation software, participants will be able to perform experiments and run simulations to advance their knowledge

Candidates applying to the programmes must choose a Mentor, who will monitor the academic progress of the candidate, and act as an advisor & coach for successful completion of the programme. Candidates should ideally choose the immediate supervisor or another senior person from the same organisation. In case a suitable mentor is not available in the same organisation, a candidate could approach a senior person in another organisation who has the required qualifications. For detailed information, please refer to the programme brochure.
Kindly note that BITS Pilani does not assign Mentors to programme participants.

The programme is designed for working professionals, and participants are not required to travel to a BITS campus. However, certain programme offer Campus Immersion Modules such as workshops or seminars, which are highly recommended but not mandatory. 

Industry Endorsements